Work Box IKEA Samla (Dremel)

I´ve got inspired by the Dremel box (https://www.thingiverse.com/thing:2836453) from @Wox. The design is good, but I wanted something a little bit different, so I made it from scratch. The diameter of the opening for the hands is 100mm, and the bolts are M5. The hole in the box must be at least 106mm in diameter. The inner part is made for threading with a thread tap, but that can be changed in the Fusion 360 file, or you can just use a drill and an M5 nut. The box wall thickness is calculated to be 1.5mm. Also, if you have a box with flat walls, you only need the Extern and Intern parts. But if you want to use an IKEA Samla box, you will also need the adapter because the wall is not flat. The adapter can be used as a template for the holes. The adapter must be cut into two pieces and glued to both the Extern and Intern parts to compensate for the difference. If the space between the two parts is too big and the gloves slip away, you can apply a layer with a hot glue gun on the Intern