Work lamp

This is a lamp for my working area. Designed to be powerful, stable and standing on long arms.
In addition to the printed parts, It needs

- 6 LEDs lamps. AC powered Model GU10
- 6 GU 10 AC connectors, They have to be wired in parallel,
- A power switch, rectangular model, but this is not mandatory. I have used two levels by wiring a capacitor in serie with the lamps for reduced brightness.
- Two Aluminium tubes 12 millimeters, length is 100 cm. make a mark at 170mm to adjust the edge.
- some wires and AC plug
- two M8 x 20 mm bolts
- two M8 x 30 mm bolts
- one M8 210 mm threaded shaft
- six M8 screws, enclosed into plastic parts and enable easy adjustment,
- four m3 bolts& screws to hold the head cover

It has to be fitted EXCLUSIVELY with Leds, Using classic bulbs would quickly overheat and melt the parts,
The support stability is ensured by enclosing a dead weight inside the stand,
It is designed for 2 Used lead batteries Yuasa NP7-12Fr. old motorbike batteries s