MakerWorld

Hand Tools

Workbench Anvil Pegs

von SilvestreDesignLab · Hand Tools

8 Downloads

12 Likes

3 Makes

Workbench Anvil Pegs AssortmentThese workbench anvil pegs are designed to work with the YUKON 60 in., 3-Drawer Hardwood Workbench from Harbor Freight tools, If you plan on using it on other workbenches, just make sure the diameter matches. These are 18.2mm Dia. and come in different lengths.12mm20mm40mm60mm80mm100mm120mm140mmMake sure you print them flat since these see forces being exerted horizontally and if they're printed vertically they may break easily. PETG is preferred but PLA should work too if not to much clamping force is being applied. The profile is set up for 4 walls and 50% infill to improve strength.

work workbench accessories workbench workbench accessory workbench add-ons tools tools 3d print Tool tool tool accesory tool accessories tool accessory tooling gse

Kategorie

Hand Tools

Quelle

MakerWorld

Veröffentlicht

09.03.2025

Aktualisiert

30.04.2026

Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz

Einteilig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 0/3

Drucker

FDM / FFF

Dateiformat

STL

Material

PLA, PETG, Wood PLA

Software

Cura, PrusaSlicer o. Ä.

Noch keine Bewertungen

Noch keine Kommentare – sei der Erste!

Workbench Anvil Pegs

Ähnliche Modelle

Zur Sammlung hinzufügen