Thingiverse
Working lamp
von menzenbach
24
Downloads
24
Likes
0
Makes
I got some RGB led strips and designed a lamp around. The main application scope is a working lamp. But also as warning lamp or flashlight it's well usable.
The design contains mount holes for an Arduino Nano, I²C RGB driver, 3S lithium charge controller and a PCB for power distribution.
For the lithium ion cells I used the flexible battery holder: https://www.thingiverse.com/thing:456900 with the
3x 26650 version https://www.thingiverse.com/download:776385.
The LED cover is for strips with 30 LED/m. I will provide a version for 60 LED/m soon.
8x8 mm neodymium magnets can be inserted in the holes on the bottom side of the stand and the handle.
The acrylic glas can be cut according the attached svg.
The design contains mount holes for an Arduino Nano, I²C RGB driver, 3S lithium charge controller and a PCB for power distribution.
For the lithium ion cells I used the flexible battery holder: https://www.thingiverse.com/thing:456900 with the
3x 26650 version https://www.thingiverse.com/download:776385.
The LED cover is for strips with 30 LED/m. I will provide a version for 60 LED/m soon.
8x8 mm neodymium magnets can be inserted in the holes on the bottom side of the stand and the handle.
The acrylic glas can be cut according the attached svg.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!