Working Stacked Verkstan Face Shields

EDIT** I have added a new version with a solid front, i recommend you print with at least 20% infill so the front is not hollow, this helps to seperate them without tearing the void open.
The version with 0.416mm gaps between masks requires the Z height to be scaled to 96%, this reduces the gap to 4mm and the height of the masks to 4.8mm which allow printing with a 0.6mm nozzle at 0.4mm layer heights. make sure you untick uniform scaling as you want the X and Y to stay at 100%. there is a 2 stacked file for testing.

Added europe 8 hole version. all other files are the UK A6 version that you double punch.

I made this stacked version of the verkstan face mask because after trying at least 10 version i found online i couldn't find any that actually worked correctly. I removed the area inside the brow to make it easier to stack and separate and added custom supports between masks which breakaway easily.

Print this with a 0.4 or preferably a 0.6 nozzle, 0.2 layer height, 0.6 l