Working Stargate Mk2

**Estimated print time is 112 hours. There are 117 parts.**

This stargate model contains additional pieces to move the top chevron as part of the dialling sequence.

Note: The model is slightly larger than the Working Stargate Mk1. Therefore the SGC base on this model will not hold the Mk1 gate firm. Please use the SGC Ramp for Working Stargate Mk1 http://www.thingiverse.com/thing:1603663

Due to the additional parts for the moving chevron. The space for wires and LED's is much less. I have used surface mount LED's in the model.

Two stepper motors are required for the model. Since the two motors face each other, I have used mounting brackets. If you intend to use a different size motor, you only need to customize the 'stepper_mount_x2.stl' file and not the base.

Besides the Arduino and Adafruit Motor Shield, there is also an optional bracket for an additional circuit board. I have used an additional board to mount the resistors and transistors for the LED's.

The "x" num