Wrangler Willys Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 237.15x150mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mmThis print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Dark Gray At layer #14 (1.2mm) swap to Light Gray At layer #20 (1.68mm) swap to White for the rest.