Thingiverse
Wrist watch stand
by Foxyman332
3
Downloads
2
Likes
0
Makes
Simple wrist watch stand.
3D printed part is designed in FreeCAD 18 but it is super simple, just an elipse 70mm by 35mm with two 8mm holes, 40mm apart.
Then I pressed in two 8mm diameter wooden sticks from hardware store, about 120mm long enough for 3-4 watches.
If you want to use longer sticks for more watches, increase also the thickness of the holder so the sticks will not move by the weight of watches.
Glue it onto a flat surfase with double sided tape and done.
3D printed part is designed in FreeCAD 18 but it is super simple, just an elipse 70mm by 35mm with two 8mm holes, 40mm apart.
Then I pressed in two 8mm diameter wooden sticks from hardware store, about 120mm long enough for 3-4 watches.
If you want to use longer sticks for more watches, increase also the thickness of the holder so the sticks will not move by the weight of watches.
Glue it onto a flat surfase with double sided tape and done.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
