WWE Edge Hueforge

Hueforge print of Edge from WWE with frame so you can use it like a table photo frame or even hang on the wall ! REMEMBER TO DOWNLOAD AL THE 3MF → CLICK ON DOWNLOAD STL ! Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA+ Sunlu Grey Transmission Distance: 2 PLA PolyTerra Muted Red Transmission Distance: 1 PLA PolyTerra Cotton White Transmission Distance: 2.5 PLA Sunlu Meta White Transmission Distance: 8Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Charcoal Black At layer #9 (0.8mm) swap to Grey At layer #10 (0.88mm) swap to Muted Red At layer #11 (0.96mm) swap to Cotton White At layer #24 (2mm) swap to White for the rest. Glue the frame in the back and connect the supports with two 3x30 dowel pins:https://www.amazon.com/Unifizz-Stainless-Support-Shelves-Silver/dp/B0CZLGY3B3/ref=sr_1_19?sr=8-19 If you want to hang it on the wall glue in the frame two sawtooth picture hangers like these:https://www.a