Slicer Discord
Wyze Camera Focus Wheel – Modelo 3D imprimible de Thingiverse Thingiverse

Wyze Camera Focus Wheel

129 Descargas
57 Likes
7 Makes
Ver Modelo
Using the Wyzecam as a webcam for your 3D printer is a problem because the focus is fixed in the camera. With a little modification, you can change it from a fixed focus, to a manual adjustable focus using this focus ring. Snap off the black ring on the Wyzecam (not the pan camera), remove the rubber ring, and gently unscrew the lens. Clean off all the residual glue, install the focus ring on the lens, replace the black ring and re-install the lens. (Make sure you don't get any dust on the imager, and make sure the lens is clean when you put it back in.

I printed mine on both an SLA and FDM printer, but of course the SLA is a bit better. A little fine tuning, sanding, may be needed. If you print on a filament printer, simply apply a little heat to the ring and slide the lens in.

Here is the link to my YouTube video with the instructions on how to do this mod. https://youtu.be/Ldg1pIjrdvo
Fuente
Thingiverse
Lo que necesitas para imprimir: Intermedio Baja confianza
¿Por qué?
postproceso considerable
Pieza única
Soportes 1/3
Ensamblaje 0/3
Ajustes 1/3
Tamaño de cama 0/3
Postproceso 2/3
Impresora
FDM / FFF
Formato de archivo
STL
Material
PLA
Cama mín.
50 mm (Pequeño)
Postprocesado
Lijado, Pegado
Software
Cura, PrusaSlicer o similar
Aún no hay valoraciones
Aún no hay comentarios – ¡sé el primero!

Modelos similares

1 Sugerencias
Feed Blog Slicer Calculadora Búsqueda por imagen Enviar Contacto Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Añadir a colección