X-Box Series S Risers

Remixed for X-Box Series S.
Opening is 63.5mm.
Added triangles so they wouldn't impede the air flow. Print on side as shown in pic, do not need supports, printer can bridge 45 degrees to make the triangles with no problems.

Settings I used, printed in 4 hours, 10 minutes and are as follows:

Printed on CR-10V3

Nozzle: .06
Layer Height .28
Wall Thickness: 1.2 (2 walls)
40% infill (cubic)
Infill layer thickness: .04

Supports: No
Build Plate Adhesion: Brim @ 3mm



This is a remix from https://www.thingiverse.com/thing:398515