MakerWorld
Hueforge & Lithophane
Zum Modell
X-MEN '97
3
Downloads
0
Likes
0
Makes
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.88mmThe Max Depth is 2.4mm and the Actual Depth is 2.5mmFilaments Used:PLA PolyLite Black Transmission Distance: 0.3PLA Kingroon Red Transmission Distance: 4.1PLA Copymaster 3D Mellow Yellow Transmission Distance: 6.2PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions:Start with BlackAt layer #12 (1.04mm) swap to RedAt layer #22 (1.84mm) swap to Mellow YellowAt layer #29 (2.4mm) swap to Jade White for the rest.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
