X-Ray Fish

Project: red fishPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x112.15mm in sizeYou may print at higher layer heights below the Min Depth of 0.32mmThe Max Depth is 2.1mm and the Actual Depth is 2.2mmFilaments Used: PLA Bambulab Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Red Transmission Distance: 3.3 PLA Bambulab White Transmission Distance: 6This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #6 (0.56mm) swap to Blue At layer #7 (0.64mm) swap to Red At layer #12 (1.04mm) swap to White for the rest.