X-TRA Large Rugged container

Compatibility with Rugged Box System This box is equivalent to four medium rugged boxes. It can be attached above or below other rugged boxes. You can attach two medium rugged boxes to either the top or bottom of this unit. Rugged Box System – Assembly Instructions Required Hardware: 10x M3 x 10 socket head screws 2x M3 x 20 socket head screws 2x M3 x 16 socket head screws Assembly Steps: Attach the Handle Secure the handle to the lid using two M3 x 10 screws. Ensure the handle moves freely—if it’s too tight, add washers between the handle and the lid for adjustment. Install the Front Clasps Attach the two clasps to the front of the case using M3 x 20 screws. Position the screws with their heads facing the edges of the case. Attach the Hinges Secure the hinges using two M3 x 16 screws. Ensure the screw heads face the edges of the case. Install the Side Clasps Place each side clasp in the recess on top of the drawer unit, ensuring the holes are aligned. Position the clasps with the flat