X-wing ship dials

here is a ship dial set that I am using to be able to play 2.5 with my 1.0 ships without needing to find a conversion kit on the secondary market I have included the ship dial that I have done -tie / fo -tie .sf -tie /ba interceptor -tie/wi whisper modified I have also included a blank back plate along with a back with a raised edge as I was also going to use a sticker for that but opted against it in the end. there are rivets included as well, I ended up gluing mine in. the actual dial disc has a slight raised edge and I print the dial images from the web onto sticker paper that I then add a laminating sheet on top of before sticking to the dialand assembling the pieces. If you find these useful you can throw some cash to me over at - https://ko-fi.com/thingsplusbitsnbobs let me know if you are desperate for the text for a particular ship etc and I will see what I can do, I only have a few resistance ships planned but will add them to the files once they are done. I have a single filament printer so for me I add the text along with the corresponding dial: make sure both text and recessed text dial are aligned (look from underneath and make sure no red outlines) then deselect drop model option and move the dial down under the print bed slice the text > save move the dial back > move the text down off the print bed plane slice the dial >save you now have to files to print print the text first then before the bed cools I swap the filament to the other colour and start the dial print. because the text is very small the printer does need to be dialled , I am on a stock ender 3 with glass bedand I am able to achieve the text staying on the bed but I do need it to be very clean.