X-Wing Version 2 (hueforge)

Rebel Alliance X-Wing preparing for battle wall art. (hueforge)See Printing instructions below. you can scale to any size you want, but make sure you don't change the “Z” axis or it will throw off the color sequence. Need a way to display theses? check out my Wall Mounted Modular Hueforge Display complete it with the optional Desk Mount Printing Instructions: Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm Filaments Used:PLA+ Sunlu Black Transmission Distance: 0.6PLA+ Sunlu Red Transmission Distance: 6PLA+ Sunlu Sunny Orange Transmission Distance: 8PLA BambuLab Basic Yellow Transmission Distance: 6PLA+ Sunlu White Transmission Distance: 5 Swap Instructions:Start with BlackAt layer #13 (0.64mm) swap to RedAt layer #21 (0.96mm) swap to Sunny OrangeAt layer #30 (1.32mm) swap to YellowAt layer #36 (1.56mm) swap to White for the rest. please follow the settings in the bambu wiki seen below for best Results. (1) Adjust the min layer height to 0.04 mm. (2) C