X1C AMS Hinge Support with LED Riser

In keeping up with changes, I have continued to update this project. I have beefed up the Hinge Supports, as well as added hinge supports from installations without the LED Riser. This is a two part Bambu X1C Accessory. First part is a LED Riser and gasket to allow the installation of LED lighting to the X1C. The second part is the AMS Hinge and Support to allow the rotating of the AMS to gain access to the top glass. One of the hinge supports also includes an external Spool holder to replace the Bambu supplied one. The side spool holder uses 22mm x 7xx with 8mm centre bearings to allow smooth rolling of external filament spools. The Hinge supports use M5-50 screws and lock nuts. AMS Rails are designed to fit most AMS units. AMS Rails are, each, secured to the AMS with two M3-10 course thread, self tapping screws. If the Sunlu Dryer is installed, you may need to create lock mechanism to keep it closed to the AMS when rotating AMS back.