X1C LED riser with (or not) diffusor and gridfinity!

Another one? yes, another one… BUT! this one has a slot to slide in a (printed) diffusor, or a piece of paperstrip cut to the right specs.if you plan to use the gridfinity add on, you can print the file with gridfinity add-on, this houses some 6x2 magnets (they press fit but to be sure use a drop of glue)if you plan to use the gridfinity add-on but still need more light? you can use the gridfinity add-on with extra LEDstrip, this houses some 6x2 magnets (they press fit but to be sure use a drop of glue) so you can use another ledstrip to house underneath the gridfinity part. this LED shines down on the buildplate and you can use the 24v AMS psu as a source. it also has a vutout on the front to house a 12mm push buttonI made the LED riser to fit in 12mm WS2812b 5v strips but can easily house other ones ofcourse. you might want to use the 24v hack and using the PSU from bambulab itself.I printed with these settings:PLA 220/55 layer height 0.2mmwalls 2bottom 2top 5infill gyroid 15%support