X1C Nozzle Whipper

Here is my nozzle cleaner for the X1C.This one cleans the nozzle from all sides.With the original whipper the filament some times got stuck on one side of the nozzle.This one is easy to print and needs a 6mm silicone hose with an inner diameter of 4mm.I've added a cutter to cut the hose in to a brush.For the main part you can use the screw from the original whipper.Step 1) Put the hose in the cutter tool from the bottom until it sits flush in the tool.Step 2) Cut in the slit of the tool to make a 5mm deep cut.Step 3) rotate the hose a bit in the tool and repeat Step 2 until you are all the way around.Step 4) Make 2 of these brushes and cut them to length.Step 5) Squeeze the 2 hoses together and push them in the whipper holder.Step 6) Screw the tool in the machine and enjoy your clean nozzle :)