x300 Quad

Tired of all the quad designs I have tried, I made a simple, medium form factor X quad for 6-7 inch props and 22XX motors.

I have updated this for an optional larger battery and more ground clearance with the legs.

To build you will need:
2x plate.stl
4x arm.stl
1x top.stl
1x batt.stl for 2200mah, batt2.stl is for 3000mah batteries
4x Legholder.stl
4x leg.stl or leg2.stl for more clearance (recommended)
1x Board cam holder.stl (optional for FPV)

hardware:
16x m3x25 bolts
8x m3x10 bolts
8x m3 metal spacers (height dependent on FC used)
4x m3 nylon spacers for FC
4x m2 nylon spacers for FPV cam
8x m3 locknuts
8x Zip ties

My build Suggestions:
2205-2208 motors capable of spinning 6-8 inch props. (Emax MT2208 or RS2205 ect.)
Littlebee 20A ESCs
Any Flight Controller utilizing CC3D/NAZE32 size.
GPS (optional)
1800-3000 mah 3s-4s battery.
Camera and vTX of your choice, standard board cam mounting