X52 Connector Brace

My x52 (Not pro) some times losses calibration. I suspect a cable glitch. I like ploebbs design but I want to be sure the connector doesn’t move at all.
The base is glued with hot glue in the four holes (or use thin double-sided tape).
The connector housing is pushed in place on the cable and secured with the lock.
Insert the original connector in the X52 and then screw in the connector housing lightly.

(Thread: “3D-printed Metric Threads V2” Class 0.5 18x3mm)

Update 2025-03-21:
Increased hot glue surface area