Thingiverse
Xavier NX case
por eths33
0
Descargas
0
Likes
0
Makes
Designed this to have a protective case when working with the Jetson Nano or Xavier NX at my desk.
The camera is stuck to the case with 2mm thick rubber tape so it can be repositioned as needed. The Jetson Nano or Xavier are also secured with the thick rubber tape (called magic tape in Japan).
The hole on the opposite side of the I/O is positioned for the Xavier's SD card.
The top and bottom case are connected by M2.5 screws (12 - 16mm in length) and brass inserts (3 - 6mm in length).
The camera case uses M2 screws.
The camera used: https://www.e-consystems.com/nvidia-cameras/jetson-nx-cameras/5mp-mipi-camera-board.asp
The camera is stuck to the case with 2mm thick rubber tape so it can be repositioned as needed. The Jetson Nano or Xavier are also secured with the thick rubber tape (called magic tape in Japan).
The hole on the opposite side of the I/O is positioned for the Xavier's SD card.
The top and bottom case are connected by M2.5 screws (12 - 16mm in length) and brass inserts (3 - 6mm in length).
The camera case uses M2 screws.
The camera used: https://www.e-consystems.com/nvidia-cameras/jetson-nx-cameras/5mp-mipi-camera-board.asp
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
