XBIB XBee Interface Board Case

This is a case for the XBee Interface Board (XBIB). It should work with the version that has the two sets of LEDs, barrel connector for power, and USB Type B port on one side (XBIB-U-DEV, XBIB-U-SS). There are five total standoffs beneath the board supporting it with three of them having pegs that will slide into the mounting holes in the board. Friction alone seems to do a decent job of keeping it in place.

No top is included as part of the case and the bottom is open to speed printing and reduce material. I've attached the scad file in case you want to customize it with OpenSCAD. I've paramaterized some things like the wall thickness and heights for standoffs.

The walls of the attached sql are 1.6 mm so if you have a 0.4mm nozzle you will probably want to print with four layers for the best outcome. As is it will probably only work if your XBee has a chip, whip or U.FL antenna. XBees with an RPSMA will probably collide with the case. I don't have any surface mount XBe