Thingiverse
Xbox Elite Controller Series 2 Stand
di jupita
117
Download
92
Likes
2
Makes
I designend this besause now it looks way better while charging.
You can print it as a multi material part or print the logo seperetly and glue it in (could be a thight fit).
There is a big hole in the stand so you can add some extra weight. I used some small gravel.
You have to stop the print at 25mm.
With the hole in the bottom you can push the charger out of the stand if you glued it in with double sided tape (what I recomend).
You can add some anti slip feet with a diameter of 8mm.
Good luck
You can print it as a multi material part or print the logo seperetly and glue it in (could be a thight fit).
There is a big hole in the stand so you can add some extra weight. I used some small gravel.
You have to stop the print at 25mm.
With the hole in the bottom you can push the charger out of the stand if you glued it in with double sided tape (what I recomend).
You can add some anti slip feet with a diameter of 8mm.
Good luck
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
