Xbox Hueforge

This is my first attempt at a hueforge. I chose these colours to match my room but feel free to try other colours. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x112.5mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.1mmFilaments Used: PLA Black Transmission Distance: 0.3 PLA Purple Transmission Distance: 1 PLA Ice Blue Transmission Distance: 3.5 PLA White Transmission Distance: 5Swap Instructions: Start with Black At layer #12 (1.04mm) swap to Purple At layer #18 (1.52mm) swap to Blue At layer #22 (1.84mm) swap to White for the rest.