Slicer Discord
Xbox Series X Controller Mini Wheel – 3D-Druckmodell von MakerWorld MakerWorld
Gadgets

Xbox Series X Controller Mini Wheel

381 Downloads
58 Likes
255 Makes
Zum Modell
Take your racing games to the next level with this Xbox mini wheel! It might need a little getting used to. This requires a 608 bearing, but if you don't have on you can check out a 3d printed 608 bearing by Tassesin: https://makerworld.com/en/models/473167-608z-6000z-roller-bearing-v2?from=search#profileId-383170. if you want, you can change the settings in your game to your liking. Break off the support piece. Snap the lever into the frame. One leg has a bump, this goes towards the back of the controller. Snap the rack into the pivot by sliding it on sideways, then twisting it back to lock it. Glue the top and bottom edge of the bearing into the frame. Wait for glue to dry. Snap the rack onto the frame. Pop the frame on the controller. Hook the front on first and then lock in the back tab. Reverse when removing it. if it doesn't turn good try lubricating it or sanding it. Thank you pixel 2 for the original model.
Kategorie
Gadgets
Quelle
MakerWorld
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Warum?
aufwändige Nachbearbeitung
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 3/3
Drucker
FDM / FFF
Dateiformat
STL
Material
Nachbearbeitung
Schleifen, Kleben, Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen