XCarve Material Alignment Aid
by Ebonovic
27
Downloads
17
Likes
0
Makes
This piece is used to set a straight edge for your material. We use it in our shop, when we are using multiple pieces of material, that are not fixed together.
This was designed to use the GREEN OEM supplied screws in the back to hole positions, this will set the straight edge. You can then use 1, 2, or all 3 of the front three hole positions for your mounting blocks and risers, to hold the piece in place.
Each of the holes are 75mm apart from one another. And will fit exactly into the OEM waste board for an XCarve
This can also be used to set angled edges as well.
This was designed to use the GREEN OEM supplied screws in the back to hole positions, this will set the straight edge. You can then use 1, 2, or all 3 of the front three hole positions for your mounting blocks and risers, to hold the piece in place.
Each of the holes are 75mm apart from one another. And will fit exactly into the OEM waste board for an XCarve
This can also be used to set angled edges as well.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
