Xenomorph Hueforge

***Scale to 60% to fit the A1 Mini The layer transitions are already inserted, you will see them once you slice it. If you only have one AMS, change the last two swaps to black and gray again, and manually replace them orange and white while the blue or red is printing, so when it swaps back to it you will end up with the fifth and sixth color. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mmFilaments Used: #282929 PLA Elegoo Black Transmission Distance: 1 #b5b7b8 PLA Elegoo Gray Transmission Distance: 5 #003eb1 PLA Elegoo Blue Transmission Distance: 2.6 #f11405 PLA Elegoo Red Transmission Distance: 3.5 #ff5500 PLA Elegoo Orange Transmission Distance: 5.6 #ffffff PLA Elegoo White Transmission Distance: 5.5This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #8 (