Xenomorph

Project: Xenomorph 1.hfpPrint at 100% infill with a layer height of 0.04mm with a base layer of 0.2mmThe Model is 150x78.95mm in sizeYou may print at higher layer heights below the Base Thickness of 1mmThe Max allowed Thickness is 1.6mm and the Actual Thickness is 1.6mmFilaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #e2dedb PLA PolyLite White Transmission Distance: 5This print uses 2 unique filamentsSwap Instructions: Start with Black At layer #24 (1.12mm) swap to White for the rest.