XH-M603 case

I didn't find a suitable case, I didn't like the idea of a square case because of the recessed indicator. as a result, I decided to make my own case. it is quite difficult to print, due to the different height of the top cover, but I printed it sideways, with a small number of supports, although there are a few threads from long bridges, but it turned out quite well :)
this version does not require screws, the case is assembled on pins, it does not hold very tightly, but acceptable and makes it easy to disassemble the building.
the only thing you will need is a 3.5mm drill bit in order to slightly enlarge the holes on the board and go through the holes in the housing so that the pins fit.