Xiaomi 1S Headlight Angle Adapter

I designed this adapter to increase the headlight of my Xiaomi 1S. In my case it was too low to drive faster than 15km/h in the dark. Now everything is much better, even if you drive 30km/h+. You loose some light immediately in front of the wheel but it's not too bad.

The adapter may fit to other Xiaomi models too. If it has the same headlight like the 1S, it should work.

Installation is pretty easy: Take off the plastic cover of the headlight and remove both screws. Gently pull out the cable from the frame, until you can disconnect the headlight. Then put the adapter between the headlight and frame and assemble everything back together. The lower screw doesn't fit with the adapter so you have to tighten the upper screw well. At the end stick the plastic cover back on the assembly.

I'm using this since a couple of 100kms without any issues.