Xiaomi PRO / PRO2 - battery depth extender

This part makes it possible to install a custom extended battery, such as the following:

10s2p 21700 - https://www.thingiverse.com/thing:5596691

A little tip: screw the spacer parts to the scooter body before you glue them on to get the perfect shape and alignment of the holes.

The spacer height is 25mm. If you need a custom height spacer:
1)Open the parts in your slicer
2)Scale models along the Z-axis to the desired height(Cura screenshot is attached)
3)Print the scaled parts

If your printer is a small Ender-3 like, then you have to print the following parts:
200x200_pro_spacer_25mm_splitted_back.stl - 1 piece
200x200_pro_spacer_25mm_splitted_front.stl - 1 piece
200x200_pro_spacer_25mm_splitted_middle.stl - 2 pieces

If your printer is a bigger one with at least 300x300 bed, then you have to print the following parts:
300x300_pro_spacer_25mm_splitted_back.stl - 1 piece
300x300_pro_spacer_25mm_splitted_front.stl - 1 piece

A little bit more information about pos