XL Pixelart Pikachu

Warning: This is a huge Pixelart and takes really long to assemble. Because of the scale I recommend, using packing tape on the back of the pixelart if you want to move it around. Use 0.2 mm height for the pixels and the clips. I tried printing it wiht 0.3mm height and the fit wasn't perfect anymore. :D If you want to try this XXL challenge then proceed my fellow 3D print pixel enthusiast: You have to print every pixel in the "desired" color. For easier printing - they are named accordingly to a color. In addition you can see the "type" of block in the name as well as the number of blocks you have to print from this type and in this color. E.g.: “Light grey x4_38” This transfers to: Color: Light grey Type: 4x connections Number: Print 38 pieces of this connector in the color light grey. Use the picture as a reference to find the right position of the blocks. It took me around 5h to assemble. I recommend printing a bunch more snap fits. Because you will have to break them if you made an