XT60 Cover and Strap

Cap for XT60 connector.

Printed at 0.2mm layer height and using PETG to ensure flexibility for the tail. I would recommend printing at least two of these at the same time and space them well apart to prevent deformation from radiant extruder heat. Also, printing these slowly to ensure the little clips that grasp the cable print properly.

Not sure how well ABS or PLA will work.

[Design file](https://cad.onshape.com/documents/b7bf7d87477a97b19005ab97/w/9e11646319b0cfd02bd63fea/e/e03df68d8e5cb3106fdecda5) can be found at Onshape.