XT60 extender with voltage display

XT60 entender with built-in voltage display.

Parts needed:
- [XT60 connectors. Male and Female](https://www.banggood.com/10X-XT60-Male-Female-Bullet-Connectors-Plugs-For-RC-Battery-p-958017.html?p=P2081224690790201809&custlinkid=745726)
- [Voltage display](https://www.banggood.com/0_28-Inch-Two-wire-2_5-30V-Three-wire-0-100500V-Digital-Display-DC-Voltmeter-Adjustable-Voltage-Meter-p-1530256.html?p=P2081224690790201809&custlinkid=745730)

Remember to check (and calibrate) the voltage display by twisting the screw.

Assembly instruction:
1) **Fit** XT60 male and female plugs into place.
2) **Solder** XT60 connectors with heavy wires (mind polarity).
3) **Solder** Voltage display across the terminals
3) **Super glue** XT60 connector into place.
4) *Isolate the solderings* with hot glue (or something similar) so they don't come into contact with the display.
5) Place the display and cover on place.
6) Glue front cover if needed. (It should be tight fit so glue probably not