XT60H Panel Mount

Needed a panel mount connector to handle high DC current and had a TON of XT60H connectors. Saw other Thingiverse models that did this but they didn't work with XT60H since there is a slight difference in design due to the cap that covers the solder joints. So I needed to design my own. This two part design sandwiches the small 1mm ridge on the XT60H between the parts which locks it into place so push and pulling on the connector does not move it.

Hole Diameter: 24mm

Default STL is set to accomodate a hole depth of 19.7mm. This can be customized using the includes Fusion 360/step files.

DO NOT edit the "Front" part. This needs to remain fixed to properly seat the XT60H. To adjust for your depth of holes you can modify two different faces using the "extrude" operation in Fusion 360. See the screenshot in the photos.

Inner face can be extruded to lengthen or shorten the inner barrel to extend into a deeper or shallower into a hole that is greater than 13.9mm deep.

For