Xtool RA3 + Laser Guide Storage Box/Case

Make Sure to USE BRIM For Large Objects, Unless you are confident!Laser engraving File: 3D Printed RA3 Durable Storage Box with Latches and Labelled Engraving | Free Files - AtommI did'nt Use brim on mine and it warped a bit.I printed everything except the Green Part on P2S.You will need M2.5 or M3 Screws to install the 4 Clips.To install the side handles you will need heat inserts and M3 screws. Refer to my Xtoo F2U UV Inner engraving Case Model for Instructions.Only difference here is the TOp cover is not on a Hinge.The holes on the handles and the sides of the bottom case are for 5mmx2mm Magnets to lock the handles in position.Print the Large Base if you have a Bigger printer. To install the Green part I printed, make sure to Tilt it a bit. It will only go in one way, there are alignment points.You can Glue it to the bottom if you want..The Green Part can also be printed in TPU if you wish. Handle attachment process (Only applies to the default version, if you have a bigger prin