xzibit hueforge

2 versions incluesversion1: 2amsversion2: 1ams avec les pauses Project: xzibit bike.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 199.37x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.1mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA+ Sunlu Grey Transmission Distance: 2 PLA BambuLab Matte Dark Brown Transmission Distance: 2 PLA+ Sunlu Silver Transmission Distance: 2 PLA BambuLab Matte Latte Brown Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Grey At layer #13 (1.12mm) swap to Dark Brown At layer #15 (1.28mm) swap to Silver At layer #16 (1.36mm) swap to Latte Brown At layer #18 (1.52mm) swap to Jade White for the rest.