Y Splitter with Text

ModelY-Splitter for the Bambu Lab P1 and X1 Series from suit1337 with textit is to be used with PC4-M10/MF10 connectorsBOM2 x original screws for PTFE coupler3 x PC4-M10 connectors (Amazon Affiliate Link)keep in mind most PC4 connectors with “M10” threads actually have M10x1,0 and not M10x1,5 threads, so they are actually MF10 - if you are unsure about your connectors, make a test print of the thread first and see if it fitsPrintingUpright with the “bottom” side of the Y facing downwardsuse tree supports only on build plateprint it with minimal layer height - preferably with a somewhat ductile filament, PETG, ABS or ASA works wellAssemblyThread the PC4-M10 Connectors in the 3 openings, gently tighten theminsert some silicone tubes into the connectors and guide a piece of filament (preferably anything hard like PLA or PC) through multiple times to smooth out the fray opening on the side facing the extruderremove the silicone tubes and the connectors again and remove any loose debrisreas