YADM – Yet Another DML Mount

This is a floating wall mount for dynamic mode loudspeakers (DML). If you are not familiar with DML audio devices, please reference the YouTube video from Tech Ingredient listed in the URL references below. These mounts are used in pairs with a 76 mm length of 3 mm elastic cord. The mounts are capable of using up to 5 mm cord if needed. I am using 8 mm x .8 mm x 10 mm springs to provide the clamping pressure on the cord. There are 2 different types of mounts provided. One uses 2 of the 3M Command Strips to mount on the wall. The other is a very simple #6 drywall screw mount. I applied the mounts to the back of the speaker panel using Starbond Black Medium-Thick Cyanoacrylate Super Glue. Some of the advantages of these mounts:You can adjust the elastic cord in the mount to perfectly level the speakers.Using the 3 legged stool principle, you only need 3 sets of mounts per speaker. (I put 2 on the top and 1 on the bottom)Minimal damage to wall (especially using the 3M strips)Panels float