Yamato (One Piece)

Project: yamato.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 135.94x170mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.5mm and the Actual Depth is 2.4mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyTerra Army Blue Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 5 PLA BambuLab Matte Lilac Purple Transmission Distance: 2 PLA BambuLab Basic Orange Transmission Distance: 7 PLA BambuLab Basic Beige Transmission Distance: 8 PLA PolyLite White Transmission Distance: 5This print uses 7 unique filamentsSwap Instructions: Start with Black At layer #9 (0.8mm) swap to Army Blue At layer #12 (1.04mm) swap to Red At layer #18 (1.52mm) swap to Lilac Purple At layer #20 (1.68mm) swap to Orange At layer #23 (1.92mm) swap to Beige At layer #27 (2.24mm) swap to White for the rest.