Printables

Accessories

Yeeps Bat 2.0 (for plush)

by ItzWazza · Accessories

13 Downloads

0 Likes

0 Makes

Go to Model

None of the yeeps bats I've seen looked good enough to my liking. I spent about 3 hours bringing this project to life!

figurine accessory yeeps

Category

Accessories

Source

Printables

Published

02.06.2026

Updated

02.06.2026

What you need to print this: Intermediate Medium confidence

Why?

supports needed

Single piece Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Est. print time

3 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Yeeps Bat 2.0 (for plush) need supports when printing?

Yes, Yeeps Bat 2.0 (for plush) will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

How long does it take to print Yeeps Bat 2.0 (for plush)?

According to the design notes, Yeeps Bat 2.0 (for plush) takes approximately 3 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Yeeps Bat 2.0 (for plush) available in?

Yeeps Bat 2.0 (for plush) is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Printables.

Is Yeeps Bat 2.0 (for plush) free to download?

Yes, Yeeps Bat 2.0 (for plush) is available as a free download through Printables. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Yeeps Bat 2.0 (for plush)

Similar Models

Add to Collection