Slicer Discord
Yet Another Miyoo Mini Plus Dock. – 3D printable model from Thingiverse Thingiverse

Yet Another Miyoo Mini Plus Dock.

1 Downloads
1 Likes
0 Makes
Go to Model
This is a Charging Dock for Miyoo Mini Plus.
I used Mako 180 Usb C Adapter. You might have cut the Excess Rubber on the Corners. But im not sure if it matters or not.
https://www.amazon.com/dp/B0CGHTXGRT
With a use Cable Matters L Adapter. But you could any L Adapter. But you don't absolutely need the L Adapter. I just put it there to make it easy to plug and unplug it.
https://www.amazon.com/dp/B0D33RWK75
I used Rubber Feet to keep if from movie around. You can use any as long there 10mm x 3.5mm. But i used these. But you don't need to have Rubber Feet at all, if you don't want to.
https://www.amazon.com/dp/B0BRLFJDYV
I super glued the 180 Adapter in Place. But I made a Plug to put on top of the Adapter, Just in Case. I have Second Plug for slightly larger Adapters. Then i made a hole, so you can see the light from the bottom of the Mako 180 Adapter.
Source
Thingiverse
What you need to print this: Beginner Low confidence
Single piece
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
PLA, ABS
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

2 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection