Yorkie Hueforge

rint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 122.67x150mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 1.5mm Filaments Used:PLA Kingroon Black Transmission Distance: 0.4PLA Kingroon White Transmission Distance: 5.8This print uses 2 unique filaments Swap Instructions:Start with BlackAt layer #8 swap to White for the rest. Boost MeIf you like my work then I would be very happy if you supported me with a boost.