Yoshi Keychain and Magnet Pack

This pack has been all set up for super simple and easy printing with the AMS or AMS lite! All the models are set to 4 Colours! Just load your filament, slice and go!   Most keychains take between 45 minutes to 1.5h to print! This Yoshi Keychain & Magnet pack includes the following Characters: Yoshi Magnet & Keychain, Yoshi Cookie, Baby Yoshi Hatching, Happy Yoshi Keychain, Yoshi Head, Yoshi Icon, Baby Yoshi, Pixel art Yoshi Head, Yoshi's Egg, Yoshi eating Apple, Chibi Yoshi, Yoshi Standing, Yoshi Excited, Yoshi Tongue, and various colour options! All models have been test printed on the A1 Mini with the AMS Lite!   I have this set to use the 0.4mm nozzle with a .28mm layer height. This prints three layers of colour so the colours turn out nice and saturated and minimize waste. After the colour, there's one solid black layer, three layers of infill, and four final solid layers for the back for strength with the back pattern set to Hilbert Curve for a nice texture. There is a small hole in each model which is just large enough to fit a 1mm keychain jump ring. If you find it too small, you can modify the size of the “Keychain hole” object in BambuStudio to make it a little larger, or take a small drill bit and drill the final keychain to make it a little bigger!   I purchased my keychain set from Amazon if you'd like to get something similar! The 8mm x 2mm magnets I used can be bought on Amazon as well!   All models have been flipped face down on the print bed so the surface texture from the PEI plate gives them a nice textured surface! All the different pieces of the models are there if you want to play around with it. There is one black ‘back’ piece in each keychain, which is perfectly aligned to the rest of the model. This causes some flickering in the viewport when moving around, but it disappears after slicing. If you modify the settings of that piece, it will affect the infill settings, so if you want to save a little filament, feel free to adjust it there! I ma