Z Axis Mod for FlashForge Inventor I

This is a Z Axis modification for the FlashForge Inventor I [one] when using a glass bed.

There are shims for other models of FlashForge 3D printers to account for the thickness of the added glass however those don't work with the FlashForge Inventor I. The Z-axis sensor for this FF model is actually at the bottom and towards the back of the machine with a small arm that is screwed into place on the side of the platen arm (yellow circle in photo.)

I have added STLs for 3mm, 4mm, 5mm, and 6mm thicknesses. The glass bed in the photos is 3mm thick so I have the arm for 3mm thickness.