Thingiverse
Z-Brace 0.5
par printingotb
56
Téléchargements
33
Likes
4
Makes
This is my take on a Z-brace for the Wanhao Duplicator i3 and probably it's clones (not the plus versions).
I designed this to leave as much open workspace as possible while maintaining maximum stability.
I call this "Z-brace 0.5" since it braces halfway up the Z-gantry.
The mod comes with optional adjustable damper-feet.
It's really rigid, easy to assemble and only requires two 250mm threaded rods and some M3-screws and nuts. All parts print without support if you have decent cooling. If you are having trouble printing the threaded parts, there is an extra tolerance version of those parts.
You need to drill 6 small holes in your printer frame, I'm including a printable "helper" to get the holes right as well as easy to follow instructions.
https://www.youtube.com/watch?v=AglEk3ycHeA
I designed this to leave as much open workspace as possible while maintaining maximum stability.
I call this "Z-brace 0.5" since it braces halfway up the Z-gantry.
The mod comes with optional adjustable damper-feet.
It's really rigid, easy to assemble and only requires two 250mm threaded rods and some M3-screws and nuts. All parts print without support if you have decent cooling. If you are having trouble printing the threaded parts, there is an extra tolerance version of those parts.
You need to drill 6 small holes in your printer frame, I'm including a printable "helper" to get the holes right as well as easy to follow instructions.
https://www.youtube.com/watch?v=AglEk3ycHeA
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !