Thingiverse
Z Height Adjuster - For Rock Solid X Axis Prusa Mount
door TBRIshtar
6
Downloads
9
Likes
0
Makes
A clamp on Z Height adjuster for use with my Rock Solid mounts.
You need:
2x M3x25 Bolts
2x M3 nuts
2x M3 washers
1x small coil spring (nominal 3mm ID)
Notch in the dial so you can quickly see if Z height has shifted, or calculate no. of turns. With M3 bolts 1 turn is 0.5mm which is convenient.
You need:
2x M3x25 Bolts
2x M3 nuts
2x M3 washers
1x small coil spring (nominal 3mm ID)
Notch in the dial so you can quickly see if Z height has shifted, or calculate no. of turns. With M3 bolts 1 turn is 0.5mm which is convenient.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
