Zen 2 Mechanical Keyboard Case

Keyboard case for Zen 2. Designed in OnShape, and wall thickness tuned for 0.4mm nozzles.

SOURCE FILES: https://cad.onshape.com/documents/c9679279e6b5d9278383d1c7/w/8c79d690317a106fdc8a4f59/e/1cf0a5c79cbf0ed693209717

You'll need to file down the ratbites on the PCB, otherwise it will not slide in the case properly. Glue is optional.

The tent is 5 degrees, and it is glued onto the bottom of the case. Print it flipped 180 degrees and glue on the side touching the bed for best results.

The tent can be mirrored to print the other side.

IT IS IMPORTANT TO PRINT BOTH FILES RATHER THAN MIRRORING FOR THE BASE DUE TO THE DIFFERENT MEASUREMENTS FOR PORTS.