Zenitsu Deamon's slayer

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 157.12x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA Brown Transmission Distance: 0.5 PLA Black Transmission Distance: 0.3 PLA Red Transmission Distance: 2 PLA Orange Transmission Distance: 3 PLA Yellow Transmission Distance: 4 PLA White Transmission Distance: 5 This print uses 6 unique filaments with break at 3h10min Swap Instructions: Start with Brown At layer #8 (0.72mm) swap to Black At layer #9 (0.8mm) swap to Red At layer #13 (1.12mm) swap to Orange At layer #18 (1.52mm) swap to Orange At layer #20 (1.68mm) swap to Yellow At layer #23 (1.92mm) swap to White for the rest.